Saturday, October 15, 2011

YMGI Ductless Mini-Split System 1-855-INGRAMS

Atmos Osprey Buy Now Best Prices Feather Body Pillow Benefits Of Exercise Bikes Order Now

Monday, October 10, 2011

Understanding the Process of Geothermal

!±8± Understanding the Process of Geothermal

Geothermal energy is widely used these days as an alternative form of energy. And 'primarily for the supply of heat for residential and commercial buildings. Many people still do not use geothermal energy to bring to the surface of the process or methods. This process is largely performed in York. What follows is a brief description of the entire process:

As geothermal Yorker process takes place?

Turn the heat to the surface

Geothermal Energybe brought to the surface, the heat of the earth. The Earth's temperature is ideal for operating the heat pump. Drilling of wells is a major part of the overall process. Rock formations beneath the surface of the earth to serve as a perfect conductor of heat.

These wells are as deep as 425 feet. Pipes up to about 4 inches in diameter are then placed in polyethylene well. This is done for the transport of the liquid on the surface. Water is the most common thermal transfer agentused for this specific action. This liquid material is injected with propylene glycol antifreeze.

The closed-loop and open

York geothermal projects are implemented on the basis of two different functions, especially in open and closed loop systems. In open-loop systems, groundwater is extracted by a heat pump that is used in closed systems during the same water throughout the system. Environmental issues, if one of the fundamental issues that are taking place, limitedonly when the pipe bursts.

Heat Pumps

Geothermal heating projects make use of a heat pump which functions similar to any other heat pump. Both, the compressor and the heat exchanger function efficiently as the surface temperature is always steady. Geothermal systems may vary but the basic components and the process remains the same.

Expert help

By now, you must have known that geothermal projects are highly sophisticated in nature. Thus, you will need the help of skilled professionals to help you in the entire procedure.


Understanding the Process of Geothermal

Graco Nautilus Coupon Get It Now!

Friday, October 7, 2011

Seisco 22 Kw Electric Micro Boiler (75,080 Btu) for Hydronic Space Heating

!±8±Seisco 22 Kw Electric Micro Boiler (75,080 Btu) for Hydronic Space Heating

Brand : Seisco
Rate :
Price :
Post Date : Oct 07, 2011 22:51:09
Usually ships in 1-2 business days



The Model SH-22 four-chamber tank less electric space heater is designed for usein residential and commercial hydronic space heating applications such as, but not limited to, radiant floor heating, baseboard, hydro-heat pump and snow melting systems. This new micro-boiler is the ideal replacement for traditional boilers and tank-type heaters and is the enabling technology for use with active renewable energy systems such as solar and geothermal systems. The temperature activated control works effectively in low pressure and re-circulating systems. With optional equipment, the SH-22 can be used as the single heat source in combination systems for potable hot water and space heating. A minimum of 200 AMP whole house electrical service is recommended.

Gravity Fitness Guide Last Minute Stihl Chainsaw Dealers Weber Baby Q Grill Quick

Tuesday, October 4, 2011

Geothermal heat pumps - cost-effective and environmentally friendly

!±8± Geothermal heat pumps - cost-effective and environmentally friendly

A geothermal heat pump (GHP) is a device, the heat from beneath the earth's surface. It is based on the principle that heat flows from higher temperature substances lower temperature materials by conduction or by convection (air flow). Geothermal heat pumps take heat from the supply of land or water heating and hot water. This works because the earth traps nearly half the solar energy that is received by the earth.

Taking advantage of the earthAbility to store thermal energy, ground source heating and cooling is cost effective and environmentally friendly, while still a lot of heat. These pump systems can pump heat from the ground in a building or, weather permitting, from the back of the building into the ground. It does not take a lot of energy for pumps and fans, unite with a compressor.

Geothermal heat pumps (GHP) are among the technologies more efficient and comfortable heating and cooling availablefor houses and other buildings. These groundwater heat pumps use the natural heat storage capacity of soil or groundwater to provide energy efficient heating and cooling. Most of the GHP is collected "desuperheater," the residual heat of the compressor and use it to preheat water heating installed for free. This is a new money-saving technology for the home.

It can cost several times to install geothermal heating and cooling system, compared to the traditional style, however,These costs are the next five to ten years ago in the form of savings in energy costs. The internal components of these systems can easily last 25 years, and pipes in the floor can last 50 years. These systems are available in many areas of practice, and about 50,000 new systems are put in each year. The body cool in summer and warm in winter.

Many newer farming systems with desuperheater, which takes you from warm air from the compressor, heat pump and use it to comeHeat your water. The only drawback is that if you do not use the compressor will not give hot water, because it does not work. Some companies are also a heating system with a party during the periods of non-use of geothermal heating systems to save money and so much more efficient.


Geothermal heat pumps - cost-effective and environmentally friendly

Bowflex Workout On Sale


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。







Sponsor Links